Stucco Repair

Damaged stucco often exhibits cracking, spalling, and delamination. Root cause of damage can vary from steel mesh/lath corrosion, freezing-thawing, lack of bond, or intrinsic issues with the mix or construction. Investigations for stucco projects can be complex, but critical for determining the appropriate repairs. Repairs in general remove unsound material, prepare the substrate, add new lath, add new flashing or weather barrier sheeting, and replace stucco section(s) with a compatible repair mix. New lath, barriers, and flashings should be integrated appropriately with the existing systems. 

The overarching goal of stucco repair mix is to develop a repair mix that has similar properties of strength, density, porosity, and water absorption to the existing stucco. If the repair mix is too strong and dense in a stucco system with weaker, more porous stucco, it can cause premature future failures of the historic or existing stucco. As new layers/coats of the stucco system are installed, they need to be cut into the existing stucco so that each succeeding layer is cut into the existing stucco at increasing amounts. In other words, the scratch coat is cut in, then the brown coat has a slightly larger area cut in, and the finish coat spans the largest in area. 

Stucco Crack Repair

Crack repair options depend on whether the crack is moving or stable, its width, and if it’s causing water infiltration. If still moving, as determined with a crack gauge, then a flexible material like sealant may be an appropriate solution. Fine sand can be broadcast into the sealant to assist with matching the crack repair to the remaining main field of stucco. If the crack is no longer moving, then a more rigid repair material, like a repair mortar, may be appropriate. Mortar repairs should be formulated and installed to match the exterior of the existing stucco.